Service & Supply Product Listing

Institutional Mattresses, Detention Products, Jail Equipment, Inmate Supplies

Cornerstone Service & Supply offers a wide selection of detention products including detention furniture to the detention marketplace.  Whether you are a city, county, state or federal facility, let Cornerstone deliver the detention furniture products you need and the prices you want.  Our highly-trained staff is available for consultations as well as assessments and repairs.  With more than 50 years of experience, Cornerstone can take care of all your Service & Supply needs.  To place an order or for more information on jail beds, inmate desks, inmate stools, prison tables, prison chairs and other detention furniture, please contact us at 877-298-7351 or use our convenient Contact Us Form.

Listings : Detention Furniture

Surface Mount Toilet Paper Holder

Size: 4″ x 4″ x 4″ Projection
Material: Stainless Steel w/Nylon Insert 14 ga Slope Top Housing
Style: Front Mounted Collapsible Ball-Joint Ball Tip Lever
Finish: US32D
Mounting Screws: Security Flat Hd, 1/4-20 x 2″
Features: For holding toilet paper. Anti-Ligature Design conveniently and easily surface-mounted on wall


› Download Specsheet

CLOTHES HOOK, WELD-ON

Size: 5/8″ x 3 1/8″ x 3″ Projection
Material: Stainless Steel
Style: Weld-on, Collapsible
Finish: US32D
Mounting : Weld-on


› Download Specsheet

Isolation Bed

The heavy duty Isolation Bed includes three bars on each side to attach restraints, slight elevation for the upper body, and is non-porous for easy cleaning.
Isolation Bed-GBIB-2000

image

Duramax Bed

Heavy duty Duramax Bed includes side bars that run the length of the bed for easy adjustment of restraints. The bed has a curved top for patient comfort and is non-porous for easy cleaning.
Duramax Bed-GDB-100

image

Bolt On Seat Top

Features: The Only Bolt-on Seat in Detention Industry; Applicable to all the Detention Stools,
Pedestal Table, or Retrofit Assembly; Cost-saving and Easy to Install or Maintain.
Seat Size: 12″ Dia x 1 1/2″ Lip
Seat Material: 14 Gauge Stainless Steel Seat with 9 Gauge Mild Steel
Fully Welded Plate
Seat Finish: US32D
Pedestal Size: 18″ High, 6″ x 6″ Top Plate, 8″ x 8″ Mounting Plate
Pedestal Material: 2″ Schedule 40 Pipe, 9 Gauge Mild Steel Mounting Plate
Pedestal Finish: USP (Prime Painted)
Mounting Hardware: Security Flat Hd, 1/4-20 x 1/2″


› Download Specsheet

Wall-Mounted Shelf

This sturdy shelf is tamper-resistant and features a row of hooks below. The shelf is designed for use in correctional facilities. We can custom design any inmate shelf you need

image

Triple Floor Mounted Bunks

The Triple bunks are designed for floor mounting and to be free standing. To provide safety, the bunk is thoroughly welded. Specifications and Cut Sheets available upon request. We can custom design these bunks to fit your facility needs. Rails, Ladder, storage boxes, pan size, and height can all be custom designed.

image

Wall Mounted Bunk

The wall mounted bunk offers durability and versatility. The bunk is thoroughly welded to provide safety, and is available in primed, painted or powder coated finishes. The bunk’s dimensions are 27”x80”x12”. The inmate bunks can be custom designed to fit your facility needs.


› Download Specsheet
image

Floor Mounted Single Bunks

Single bunks are designed for floor mounting and to be free standing. To provide safety, the bunk is thoroughly welded. The standard single bunk size is 27”x80” and stands 16” tall from floor to top angle iron. These bunks can be custom made to fit your facility needs.


› Download Specsheet
image

Grab Bar / Cuffing Bar

18 gauge type 304 stainless steel tube measuring 1 1/2” diameter welded to 7 gauge type 304 stainless steel wall mounting plates. 3 anchor holes are equally spaced on each wall mounting plate.


› Download Specsheet
image

Food Pass Assembly with Piano Style Hinge

7 gauge 2 piece frame construction for post application. Opening 15” wide by 5” tall, covered by 1/4” thick steel door which operates using a security piano type hinge with welded pin. Lock
preparation for industry standard hardware.


› Download Specsheet
image

Folding Shower Seat

All stainless steel construction including Frame assembly and internally reinforced folding shower seat hinging on a non-removable pin. All sharp edges ground smooth. This unit comes prepared to be mounted from the front with bolt holes evenly spaced on face plate, or rear mounted with all thread and mounting plate. Please specify which configuration you need when placing your order.


› Download Specsheet
image

Correctional Soap Dish

This correctional soap dish has all stainless steel construction including 10 gauge face, 14 gauge welding body & back plate with all sharp edges ground smooth. This unit comes prepared to be mounted from the front with bolt holes evenly spaced on face plate, or rear mounted with all thread and mounting plate. Please specify which configuration you need when placing your order.


› Download Specsheet
image

Correctional TV Shelf

10 gauge one piece construction forming a 24” wide by 24” deep shelf. Front flanged 1 1/2” and gusseted each end for support. (x4) 9/16” mounting holes for attachment to substrate. (anchors not included in purchase).


› Download Specsheet
image

Correctional Toilet Paper Holder

All stainless steel construction including 10 gauge face plate, 14 gauge rolled body & back plate, welded and ground smooth. This unit comes prepared to be mounted from the front with bolt holes evenly spaced on face plate, or rear mounted with all thread and mounting plate. Please specify which configuration you will need when placing your order.


› Download Specsheet
image

Key Cabinet

16” wide by 24” tall x depth as required to accommodate key capacity formed from 10 gauge mild steel. 14 gauge interior panels swivel to allow storage of both paracentric and mogul keys.


› Download Specsheet
image

Pedestal Style Table

Heavy duty dayroom table featuring all steel construction, fully welded and ground smooth. Choose from our seat and top configurations along with finish options to get just the right table for your facility. This Pedestal Style Table unit is commonly found in dayrooms, group cells, and other multiple occupancy areas. Octagonal (for table) or round (for seat) one piece steel fully welded with edges rounded.
The top of your choice is welded evenly to a mild steel backing plate increasing support. Table can come in a HC design as well. Tables can be custom designed to meet your facility needs.


› Download Specsheet
image

Drop Door Style Pistol Locker

10 gauge mild steel forming evenly spaced 20” wide by15” high by 10” deep compartments. Line each compartment with moth-proofed felt. The doors are 10 gauge mild steel, hung on continuous security
piano style hinges with welded pin. The locks are Snap on Cam Locks provided, Keyed Separately and Master Keyed. 2 Master keys supplied per locker (one lock per compartment). Cornerstone can custom design to allow different compartment configuration sizes. Lockers can be recessed or surface mounted.


› Download Specsheet
image

Pistol Locker

The Cabinet of the pistol locker is 10 gauge mild steel. The door is a 10 gauge mild steel, hung on continuous security piano style hinges with welded pin.Tilt-out compartment attached to door with
formed sides. Line each compartment with moth proofed felt. Snap on Cam Locks provided, Keyed Separately and Master Keyed. 2 Master keys supplied per locker (one lock per compartment). These lockers can be recessed or wall mounted.


› Download Specsheet
image

Standard Modesty Panel

10 gauge panel framed by angles both sides & 1/2” diameter round bar top and bottom. Evenly spaced welds ensure a square rigid construction. The support Frame is vertical angle running floor to ceiling with 7 gauge mounting plates & sleeve at ceiling to allow for some adjustment. Wall mounting angle full height of privacy screen with evenly spaced 9/16” holes for 1/2” anchors (anchors not
included in purchase).


› Download Specsheet

Floor Mounted Bench

One piece continuously flanged top, fully welded and ground smooth. Pedestal supports 3’0” apart spaced evenly across the bench’s length. Cuff Rings and Cuff Rails can be added. We custom make benches to fit any size needed.


› Download Specsheet
image

Flat Bar Safety Hook

Hooks are held in tension bracket with a rubber washer that allows weight capacity adjustment. Tension brackets are welded to a wall mounting plate. Wall mounting plate comes with evenly spaced holes for wall mounting. (mounting screws not included).


› Download Specsheet
image

Video Visitation Station

Floor mounted stand alone video visitation unit. 3 person configuration including attached stools and writing surface. Face units prepped for video visitation equipment as specified in contract documents. Cornerstone can custom make video visitation unit per the facility needs.


› Download Specsheet
image

Wall Mounted Desk & Seat

Desk Construction: 18” wide by 18” deep writing surface. One piece 10 gauge construction including support gussets and wall mounting brackets. Front and rear flanged 1 1/2”.
Seat Construction: 12” wide by 18” deep writing surface. One piece 10 gauge construction including support gussets and wall mounting brackets. Front and rear flanged 1 1/2”.
Cornerstone can custom design the desk and seats to meet your facility needs.


› Download Specsheet
image

Wall Mounted Bench

One piece continuously top flanged 1 1/2”, fully welded and ground smooth. Formed gussets spaced 3’-0” apart evenly across the benches length. Cornerstone can custom make per your facility needs.


› Download Specsheet
image

Suicide Resistant Grab Bar

Suicide resistance in corrections requires a balance between product and facility design. The Cornerstone suicide Grab Bar is designed exclusively for the corrections environment and suicide resistance in mind. Made of all stainless steel. No rusting and germs can’t infiltrate it like they can with aluminum. Roll formed to insure smooth edges and few hiding places. One unit weight is around 25lbs. This unit has a brushed stainless steel finish

image

Long Gun Weapons Locker

10 gauge mild steel housing 48” high by 11” deep (length based on configuration) forming evenly spaced compartments. Each compartment equipped with hardwood stock and barrel rests. Snap on Cam Locks provided, Keyed Separately and Master Keyed. 2 Master keys supplied per locker (one lock per compartment). Gun Lockers can be custom designed to fit your facility needs.


› Download Specsheet
image

Floor Mounted Inmate Desk with Stool

1 1/2” by 3/16” thick tube frame welded to floor mounting plate and desk top to provide 30” A.F.F. writing surface. 12” diameter by 14 gauge thick stainless steel stool swings out of the way using our standard swing stool picot assembly also seen on our wall mounted swing stools. The Floor Mounted inmate Desk and Stools come in all designs. This is just one of the designs we offer. We can make the desk per your facility requirements.


› Download Specsheet
image

Floor Mounted Stool

Circular stool top with 1 1/2” flange fastened to support plate. 2 1/2” diameter tube pedestal extends to 8” square floor mounting plate. The tube of the stool can be finished painted per our standard color chart. The stool height can be sized to your facility needs.


› Download Specsheet
image

Floor Mounted Double Bunk

Heavy Duty bunk including all steel construction, fully welded and ground smooth. Angle frames and braces form a rigid frame. One piece bunk pans get flanged 2” with a 1” hem up in back & down in front to promote drainage.

Optional Accessories:
•Ladder, Shelves, Drawers, Safety Rails
Finish:
•Powder Coat Finish or Shop Primer(see standard color chart)
Floor Mounted Bunks can be custom designed to fit your facility needs.


› Download Specsheet
image

Inmate Shelf

SHELF CONSTRUCTION:

12 gauge one piece construction forming a 16” wide by 8” deep shelf. Front flanged 2” and gusseted each end for support. 4 mounting holes for attachment to substrate. Preparation for mounting hardware as described by customer.

FINISH:

Powder coating: We prefer powder coat finish because of its durability and longevity.

Primer: Shop applied red or gray oxide. Short term protection.

Stainless steel tops: #4 finish.

Cornerstone offers many designs for the inmate shelf. We can supply your facility with the design that fits your needs best.


› Download Specsheet
image

MIRROR BACKPLATE

Material: Mild Steel Plate, 3/16″thk
Mounting: Concrete Expansion, Anchor, or Weld On.
Finish: Red Oxide Primer

Picnic Style Table

Heavy duty picnic table featuring all steel Construction, fully welded and ground smooth. Choose from our seat and top configurations along with finish options to get just the right table for your facility. This unit is commonly found in dayrooms, group cells, and other multiple occupancy areas. Cornerstone can custom make Picnic Style Tables to fit your facility design.


› Download Specsheet
image

Spider Table

Heavy duty dayroom table featuring all steel construction, fully welded and ground smooth. Choose from our seat and top configurations along with finish options to get just the right table for your facility. This unit is commonly found in dayrooms, group cells, and other multiple occupancy areas. These tables can be custom designed to fit your facility needs when it comes to Prison Furniture. Game Tops can be added.


› Download Specsheet
image

Ball & Pin Safety Hook

Hook body formed from stainless steel with the back left open for tension adjustment. All 4 corners welded and ground smooth. Mounting holes are countersunk to accommodate countersunk mounting screws. This Style Ball and Pin Safety Hooks comes in a single hook, Double Hook, or 4 hook Assembly.


› Download Specsheet
image